View GT5G133_4841873.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

GT5G133
TOSHIBA Insulated Gate Bipolar Transistor Silicon N Channel IGBT
GT5G133
Strobe Flash Applications
Unit: mm * Enhancement-mode * Low gate drive voltage: * Peak collector current: VGE = 2.5 V (min) (@IC = 130 A) IC = 130 A (max)
* Compact and Thin (TSON-8) package
Absolute Maximum Ratings (Ta = 25C)
Characteristics Collector-emitter voltage Gate-emitter voltage Collector current Collector power dissipation(t = 10 s) Junction temperature Storage temperature range DC Pulse Pulse (Note 1) (Note 2a) (Note 2b) Symbol VCES VGES VGES ICP PC (1) PC (2) Tj Tstg Rating 400 4 5 130 0.83 0.69 150 -55 to 150 Unit V V A W W C C 1,2,3 4 5,6,7,8 Emitter Gate Collector
JEDEC Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). JEITA TOSHIBA
2-3Y1A
Weight: 0.02 g (Typ.)
Circuit Configuration
8 7 6 5
Thermal Characteristics
Characteristics Thermal resistance , junction to ambient (t = 10 s) (Note2a) Thermal resistance , junction to ambient (t = 10 s) (Note2b) Symbol Rth (j-a) (1) Rth (j-a) (2) Rating 150 180 Unit C/W C/W 1 2 3 4
Marking
(Note 3Note 4) 8
7
6
5
Part No. (or abbreviation code)
5G133
Product-specific code
Lot No
Pin #1
1
2
3
4
Note : For (Note 1) , (Note 2a) , (Note 2b) , (Note 3) and (Note 4) .
1
2010-01-15
GT5G133
Electrical Characteristics (Ta = 25C)
Characteristics Gate leakage current Collector cut-off current Gate-emitter cut-off voltage Collector-emitter saturation voltage Input capacitance Rise time Turn-on time Switching time Fall time Turn-off time tf toff VIN: tr 100 ns tf 100 ns Duty cycle 1% Symbol IGES ICES VGE (OFF) VCE (sat) Cies tr ton Test Condition VGE = 4 V, VCE = 0 VCE = 400 V, VGE = 0 IC = 1 mA, VCE = 5 V IC = 130 A, VGE = 2.5 V VCE = 10 V, VGE = 0, f = 1 MHz 3V 0 2.3 62 Min. 0.55 Typ. 3.0 2480 2.0 2.1 1.5 2.1 Max. 10 10 1.05 Unit A A V V pF

300V

s
Note
Note 1: Please use devices on condition that the junction temperature is below 150C. Repetitive rating: pulse width limited by maximum junction temperature.
Note 2a : Device mounted on a glass-epoxy board (a)
FR-4 25.4 x 25.4 x 0.8 (Unit: mm)
Note 2b : Device mounted on a glass-epoxy board (b)
FR-4 25.4 x 25.4 x 0.8 (Unit: mm)
for Collector for Emitter for Gate
for Gate for Collector for Emitter
Note 3: on lower right of the marking indicates Pin 1. * Weekly code: (Three digits)
Week of manufacture (01 for first week of year, continues up to 52 or 53) Year of manufacture (One low-order digits of calendar year)
Note 4: A line under a Lot No. identifies the indication of product Labels. [[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]] Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. The RoHS is the Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
2
2010-01-15
GT5G133
Caution on handling
This device is MOS gate type. Therefore , please care of a protection from ESD in your handling .
Caution in design
You should be design dV/dt value is under 400V/s below figure.1. The slope of VCE from 30v to 90v (attached figure.1)
dv/dt = (90V-30V) / (t) = 60V / t
a) waveform b)waveform(expansion)
IC(begin) VCE
IC
IC(end)
VCE 90V 30V
dv/dt Figure.1 Outside pin Outside pin is same collector voltage.
period t dv / dt
These outside pin are same collector voltage.

PIN ASSIGNMENT Emitter Gate Collector
3
2010-01-15
GT5G133
IC - VCE
200 4 3 200 3 2.7
IC - VCE
(A)
160
(A)
2.7 2.5
160
4 2.5
IC
Corrector current
Corrector current
120
VGE = 2 V
IC
120 VGE = 2 V 80 80 40 Common emitter Ta = -40C 0 0 1 2 3 4 5 0 0 1 2 3 40 Common emitter Ta = 25C 4 5
Correctoremitter voltage
VCE
(V)
Correctoremitter voltage
VCE
(V)
IC - VCE
200 3 5
VCE(sat) - Ta Collector-emitter saturation voltage VCE(sat) (V)
4
(A)
160
2.7 2.5
4
IC = 130 A
IC
120
Corrector current
3
100 70
VGE = 2 V 80
2
30
40 Common emitter Ta = 70C 0 0 1 2 3 4 5
1 Common emitter VGE = 2.5 V 0 -50 0 50 100 150
Correctoremitter voltage
VCE
(V)
Ambient temperature
Ta
(C)
IC - VGE
160 1.6
VGE(OFF) - Ta
(A)
120 Ta = -40C
70
Gate-emitter cut-off voltage VGE(OFF) (V)
25
1.2
IC
80
Corrector
0.8
40 Common emitter VCE = 5 V 0 0 1 2 3 4
0.4 Common emitter VCE = 5 V 0 -50 IC = 1 mA 0 50 100 150
Gateemitter voltage
VGE (V)
Ambient temperature
Ta
(C)
4
2010-01-15
GT5G133
VCE, VGE - QG
Common emitter VCC = 300 V RL = 2 Ta = 25C VCE
VCE
400
8
C - VCE
10000
VGE (V)
Cies
300
6
pF C Capacitance
1000
Collectoremitter voltage
200
VGE
4
Gateemitter voltage
100 Coes 10 Cres
100
2
0 0
0 10 20 30 40 50
Common emitter VGE = 0 V f = 1 MHz Ta = 25C 100 1000
1 1 10
Gate charge
QG
(nC)
Correctoremitter voltage
VCE
(V)
10
Switching Time - RG
10
Switching Time - IC
ton
tr toff tf
(s)
(s)
toff tf 1
Switching Time
1
Switching Time
Common emitter VCC = 300 V VGE = 3 V IC = 130 A Ta = 25C 0.1 10 100 1000
ton tr
Common emitter VCC = 300 V VGE = 3 V RG = 62 Ta = 25C 80 120 160 200
0.1 0 40
Gate resistance
RG
()
Collector current
IC
(A)
Maximum Operating Area
800 160
Minimum Gate Drive Area
ICP (A)
(F)
600
120 Ta = 25C 70
CM
Peak collector current
Main capacitance
400
80
200
0 0
VCM = 350 V Ta < 70C = VGE = 2.5 V 56 < RG < 91 = = 40 80 120 160 200
40
0 0 2 4 6
Peak corrector current
ICP
(A)
Gateemitter voltage
VGE (V)
5
2010-01-15
GT5G133
RESTRICTIONS ON PRODUCT USE
* Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. * This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. * Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. * Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact ("Unintended Use"). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. * Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. * Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. * The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. * ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. * Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. * Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations.
6
2010-01-15

▲Up To Search▲

Price & Availability of GT5G133

	To Download GT5G133 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .